毛细现象液面形状特性分析

毛细管插入液面时,液体会由于表面张力作用而上升,这就是毛细现象.大多数学者在计算毛细现象中液面上升高度时,直接假定液面为球帽型,计算液柱重力势能时,将液体近似为圆柱体,忽略球帽的重力势能.本文严格计算了液面的形状,发现当液面较窄时(小于液面上升高度),这种近似是合理的.但液面较宽时,近似计算结果与实际情况偏离较大.本文在特殊情况下验证了描述液面接触角的杨氏方程的正确性.     

西北干旱地区传统建筑安全性能研究——以永登县红城感恩寺碑亭为例

西北地区传统建筑易于受到恶劣干旱环境的侵蚀和破坏,迫切需要评判其重要构件与节点的安全性能,做到科学延续传统建筑的生命周期。以永登红城感恩寺碑亭为例,建立主要承重结构有限元分析模型,依据构件、构架的残损检测数据,修正分析模型,开展具体构件、连接节点承载力及其结构整体的静力学研究,以期结合本地区的环境条件,讨论传统建筑的安全性能及其破坏发展趋势。     

略谈磁性指向器的形制

司南是最早的磁性指向器.北宋时期,磁化技术的突破,导致磁性指向器的形制有了新的演变,其中,用针指向是磁性指向器形制最重要的改进.指南针的出现,极大提高了磁性指向器的指向精度,加快了磁偏现象的发现.之后,指南针的形制仍不断被改进,指南鱼发展成水罗盘,用以指向的木刻鱼被穿上小木条的磁针取代,"指南鱼"的形制消失;指南龟发展成枢轴支承式,成了旱罗盘.本文对磁性指向器的发明和演进过程稍作梳理,希望对帮助广大读者了解这一问题能够有所裨益.     

略论江西红色文化与高校学生党建工作

江西红色文化是中国共产党领导新民主主义革命在江西区域留下的丰硕成果,在物质和非物质两个层面展示出中华文明璀灿的光辉。高校是培养建成社会主义全面小康社会人才和接班人的重要阵地,学生党建工作更是事关实现中华民族伟大复兴。本文比较全面和深刻地分析了江西红色文化的载体、内涵和特征,就新时期高校学生党建工作面临挑战条件下,如何运用这一宝贵文化资源,创新学生党建的质量和水平,提出了理念思路和方式方法。     

3-(4-硝基苯基)氨基-1H-吲哚-4(5H)-酮的简便合成及结构表征

以对甲氧基乙二醛一水合物、3-苯氨基-5,5-二甲基-2-环己烯-1-酮和4-硝基苯胺为原料,对甲苯磺酸为催化剂,在乙醇溶剂中,微波辐射下多组分一步法合成标题化合物C29H27N3O4.其结构通过单晶X射线衍射法确定,晶体属三斜晶系,空间群P1,Mr=481.54,晶胞参数:a=0.617 80(5)nm,b=1.291 04(11)nm,c=1.606 78(13)nm,V=1.237 45(18)nm3,Z=2,Dc=1.292 Mg·m-3,μ=0.087mm-1,F(000)=508.晶体结构用直接法解出,经全矩阵最小二乘法对原子参数进行修正,最终的偏离因子R=0.059 3,Rw=0.134 8.在晶体结构中新形成的吡咯环为芳构化的共平面结构.     

基于离散时间风险模型下的亏损破产概率的研究

新定义离散时间风险模型下的亏损破产概率为初始盈余u,亏损额度不大于y的破产概率。利用离散时间风险模型下的终时破产概率的计算规律,得到初始盈余水平在不同条件下的亏损破产概率的具体表达形式,并且数值模拟了一定条件下不同参数取值对亏损破产概率的影响情况,数据表明当亏损边界固定时,随着初始盈余水平的增加,亏损破产概率水平逐渐减小;当初始盈余水平固定时,随着亏损边界的增加,亏损破产概率水平逐渐增多。     

基于供应链业务流程改造的模块化设计

首先通过对A公司供应链业务流程现状进行分析,发现存在的问题,然后从模块化的角度对业务流程进行改造,并进一步对改造后的业务流程所涉及的4个模块进行了设计.所提出的供应链模块化设计,可将复杂流程简单化,使供应链管理更加明确、清晰,对于提高供应链的运作效率,缩短对需求响应时间具有重要作用.     

Comparison of reduction disintegration characteristics of TiO2-rich burdens prepared with sintering process and composite agglomeration process

To reveal the impact of the composite agglomeration process (CAP) on the reduction disintegration properties of TiO2-rich iron-making burden for a blast furnace, the reduction disintegration indices (RDIs), mineral constituents, and microstructure of the products pre-pared by the CAP and the traditional sintering process (TSP) were investigated. The results showed that, compared to the sinter with a ba-sicity of 2.0 prepared by the TSP, the RDI+6.3 and the RDI+3.15 of the CAP product with the same basicity increased by 28.2wt%and 13.7wt%, respectively, whereas the RDI?0.5 decreased by 2.7wt%. The analysis of the mineral constituents and microstructure of the products indicated that the decreasing titanohematite content decreased the volume expansion during reduction. Meanwhile, the decreasing perovskite content decreased its detrimental effect on the reduction disintegration properties. In addition, the higher silicoferrite of calcium and aluminum (SFCA) content improved the strength of the CAP product. Together, these factors result in an improvement of the RDI of the CAP products. In addition, compared to the sinter, the reduced CAP products clearly contained fewer cracks, which also led to mitigation of reduction disintegration.     

Comparison of reduction disintegration characteristics of TiO2-rich burdens prepared with sintering process and composite agglomeration process

To reveal the impact of the composite agglomeration process (CAP) on the reduction disintegration properties of TiO₂-rich ironmaking burden for a blast furnace, the reduction disintegration indices (RDIs), mineral constituents, and microstructure of the products prepared by the CAP and the traditional sintering process (TSP) were investigated. The results showed that, compared to the sinter with a basicity of 2.0 prepared by the TSP, the RDI_+6.3 and the RDI_+3.15 of the CAP product with the same basicity increased by 28.2wt% and 13.7wt%, respectively, whereas the RDI_-0.5 decreased by 2.7wt%. The analysis of the mineral constituents and microstructure of the products indicated that the decreasing titanohematite content decreased the volume expansion during reduction. Meanwhile, the decreasing perovskite content decreased its detrimental effect on the reduction disintegration properties. In addition, the higher silicoferrite of calcium and aluminum (SFCA) content improved the strength of the CAP product. Together, these factors result in an improvement of the RDI of the CAP products. In addition, compared to the sinter, the reduced CAP products clearly contained fewer cracks, which also led to mitigation of reduction disintegration.